Triumph Daytrona 675 User Manual

98
Maintenance and Adjustment
To change the spring pre-load, rotate the
adjuster clockwise to increase pre-load, or
counter-clockwise to decrease pre-load.
Always set the pre-load adjusters to the same
setting on both forks.
Note:
• On Daytona 675 and Street Triple,
ensure there are an equal number
of graduation lines visible on both
forks.
• Daytona 675 R does not have
graduation lines and so turns of
the adjuster clockwise from the
turned fully counter-clockwise
position must be counted.
Rebound Damping Adjustment
Daytona 675 and Street Triple R
1. Rebound damping force adjuster
The rebound damping adjusters are located
at the top of each fork.
To change the rebound damping force, rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease. Always count
the number of clicks out from the screwed
fully in position and set both forks to the
same setting.
Daytona 675 R
1. Rebound damping force adjuster
The rebound damping adjuster is located at
the top of the right hand Öhlins NIX30 fork.
To change the rebound damping force, rotate
the adjuster clockwise to increase, or
counter-clockwise to decrease using a 3 mm
allen key. Always count the number of clicks
counter-clockwise from the fully-clockwise
position noting that the first stop (click
position) is counted as zero.
1
cgnp
1

Triumph Daytrona 675 Specifications

General

Brand	Triumph
Model	Daytrona 675
Category	Motorcycle
Language	English