78
Maintenance and Adjustment
Note:
• HD4X Hybrid OAT coolant, as
supplied by Triumph, is pre-mixed
and does not need to be diluted
prior to filling or topping-off the
cooling system.
Coolant Level Inspection
Note:
• The coolant level should be
checked when the engine is cold
(at room or ambient temperature).
Daytona 675 and 675 R
1. Expansion tank
2. Tank cap
3. MAX mark
4. MIN mark
Position the motorcycle on level ground and
in an upright position. The expansion tank
can be viewed from the left hand of the
motorcycle, between the rear of the lower
fairing and the frame.
Check the coolant level in the expansion
tank. The coolant level must be between the
MAX and MIN marks. If the coolant is below
the minimum level, the coolant level must be
adjusted.
Warning
HD4X Hybrid OAT coolant contains
corrosion inhibitors and anti-freeze suitable
for aluminum engines and radiators.
Always use the coolant in accordance with
the instructions of the manufacturer.
Coolant that contains anti-freeze and
corrosion inhibitors contains toxic
chemicals that are harmful to the human
body. Never swallow anti-freeze or any of
the motorcycle coolant.
1
2
3
4
cdle
To Next Page
Need help?
General
