GENERAL INFORMATION
27
The smart key operates the keyless
ignition system. An additional smart key
can be purchased from your Triumph
dealer. However, only three keys can
be programmed to the motorcycle. This
can be a combination of smart keys and
passive keys.
For security reasons, the smart key
should be switched off every time it is
removed from the motorcycle.
Smart Key Battery Replacement
Warning
There is a risk of explosion if an
incorrect battery is used.
Always make sure that the correct
battery size and type is used.
Warning
Batteries contain harmful materials.
Always keep batteries out of the
reach of infants and young children to
prevent them being swallowed.
If swallowed, consult a doctor
immediately.
Caution
Do not touch the contact sides of the
battery with your skin. Only touch the
edges of the battery when you hold it.
The natural materials in your skin can
cause corrosion and shorten the life of
the battery.
To replace the smart key battery:
▼ Make sure that the smart key is in
passive mode (red LED).
▼ Remove the battery cover fastener
using a 0.06 in (1.5 mm) AF Allen key.
▼ Remove the battery cover.
▼ Remove the battery, noting its
orientation.
▼ Insert a new 3 Volt CR2032 Lithium
battery.
▼ Replace the battery cover making
sure that it aligns correctly.
▼ Reinstall the battery cover fastener
and tighten to 2.7 lbf in (0.3 Nm).
Battery Disposal
The used battery must be handed to a
recycling agent who will make sure that
the dangerous substances from which
the battery is manufactured do not
pollute the environment.
To Next Page
Need help?
General
