GENERAL INFORMATION
44
A warning message is shown stating
that the riding mode has changed. It
also briefly allows the riding mode to
be changed back to the original riding
mode.
Otherwise, the last selected riding mode
will be remembered and activated when
the ignition is switched ON. If the mode
icons are not shown when the ignition
switch is in the ON position, make sure
that the engine stop switch is in the
RUN position.
OFF ROAD and OFF ROAD PRO riding
modes cannot be selected while the
motorcycle is in motion. The motorcycle
must be stationery before selecting OFF
ROAD and OFF ROAD PRO riding modes.
m
Rain
ABS
RAIN
MAP
RAIN
TC
RAIN
SUSPENSION
COMFORT
RIDING MODES
15
°C
12:34
PM
0
F
E
N
MPH
RPM X 1000
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
0
1212
4
3
1
5
2
1. Mode button
2. Current riding mode
3. Riding mode selection tray
4. Current riding mode selected
5. Current riding mode selected settings
To select a riding mode:
▼ Press and release the MODE button
on the left hand switch housing to
activate the riding mode selection
tray.
▼ The currently active riding mode
icon is shown highlighted.
To change the selected riding mode:
▼ Press the joystick down or up, or
repeatedly press the MODE button
until the required riding mode is
highlighted in the center of the
riding mode selection tray.
▼ A brief press of the joystick center
will select the required riding mode,
and the riding mode icon in the right
hand side of the display will change.
▼ The selected mode is activated
once the following conditions for
switching modes have been met:
Motorcycle Stationary - Engine Off
▼ The ignition is switched ON.
▼ The engine stop switch is in the
RUN position.
Motorcycle Stationary - Engine Running
▼ Neutral gear is selected.
Motorcycle in Motion
OFF ROAD and OFF ROAD PRO riding
modes cannot be selected while the
motorcycle is in motion.
Within 30 seconds of selecting a riding
mode the rider must carry out the
following simultaneously:
▼ Close the throttle.
▼ Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
If a riding mode change is not
completed, the riding mode icon will
alternate between the previous riding
mode and the newly selected riding
mode until the change is complete or it
is canceled.
Once the riding mode selection is
complete, normal riding can be resumed.
To Next Page
Loading...
Need help?
General
