GENERAL INFORMATION
62
RUN Position
The engine start/stop switch must be in
the RUN position for the motorcycle to
operate.
START Position
The START position operates the electric
starter allowing for a quicker engine
start.
From the ignition off, press and hold the
engine start/stop switch in the START
position with all the correct conditions
met, to start the motorcycle.
For more information, see the Starting
the Engine section.
HOME Button
The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
to select between the main menu and
instrument display.
All messages that appear in
the instrument display must be
acknowledged by pressing the Joystick
center before the HOME button can be
operated.
Left Handlebar Switches
ckdf
5
6
1
2
3
7
8
9
10
4
1. Cruise control adjust switch (if equipped)
2. Daytime Running Lights (DRL) switch
(if equipped)
3. MODE button
4. Turn signal switch
5. Joystick button
6. Horn button
7. Heated grips switch (if equipped)
8. Front fog lights switch (if equipped)
9. High beam button
10. Rider’s heated seat switch (if equipped)
Cruise Control Adjust Switch
(if equipped)
The cruise control adjust switch is a two
way switch with the top marked RES/+
and the bottom marked SET/-.
For more information on cruise control
operation, see page 68.
To Next Page
Loading...
Need help?
General
