GENERAL INFORMATION
92
Rider's Seat Height Adjustment
Warning
Always adjust both seat height
adjusters. Adjusting only one height
adjuster may prevent correct
installation of the seat.
Riding the motorcycle with an
incorrectly mounted seat may cause
loss of motorcycle control and an
accident.
Warning
After adjusting the seat height,
operate the motorcycle in an area free
from traffic to gain familiarity with the
new seat position.
Riding the motorcycle with the seat in
an unfamiliar position may cause loss
of motorcycle control and an accident.
The rider's seat is adjustable for height
by approximately 0.78 in (20 mm). The
rider's seat is shown in the high seat
position below.
6
5
1
4
3
4
3
2
7
8
7
8
9
1. Rider's seat
2. Seat height adjustment rail (front)
3. High seat height position (front)
4. Low seat height position (front)
5. Rubber band (front)
6. Seat height adjustment rail (rear)
7. High seat height position (rear)
8. Low seat height position (rear)
9. Rubber band (rear)
To adjust the rider's seat:
▼ Remove the rider's seat (see
page 91).
▼ Make sure the front and rear rubber
bands are secured in place.
▼ Pull the front seat height
adjustment rail away from the
seat to release it from its current
position.
▼ Move the front seat height
adjustment rail into the high or low
position. Make sure that the front
seat adjustment rail is secure in its
new position.
▼ Pull the rear seat height adjustment
rail away from the seat to release it
from its current position.
To Next Page
Loading...
Need help?
General
