GENERAL INFORMATION
93
▼ Move the rear seat height
adjustment rail into the high or low
position. Make sure that the rear
seat adjustment rail is secure in its
new position.
▼ Reinstall the rider's seat (see
page 91).
Heated Seats (if equipped)
The heated seats switches are located
on the left hand side of the motorcycle.
1
2
1. Rider’s heated seat switch location
2. Passenger’s heated seat switch location
The heated seats will only heat when
the engine is running. When the heated
seats are switched on, the heated seats
symbol will appear in the display. The
selected heat level for each seat will
also be indicated by the color of the
symbol.
There are two levels of heat: low and
high.
1 2
1. Low heat symbol (amber)
2. High heat symbol (red)
Rider Heated Seat
▼ For maximum benefit in cold
conditions, from the OFF position
press the rider heated seat switch
once for the high heat setting
initially, and then reduce the heat
level by pressing the rider heated
seat switch again for the low heat
setting when the seat has warmed
up.
▼ To turn the rider heated seat off,
press and release the rider heated
seat switch until the heated seats
symbol is no longer shown in the
display.
Passenger Heated Seat
▼ For maximum benefit in cold
conditions, switch the passenger
heated seat switch to the high
heat setting initially and then
reduce the heat level by switching
the passenger heated seat switch
to the low heat setting when the
passenger seat has warmed up.
▼ To turn the passenger heated seat
off, move the switch to its central
position. After a short delay, the
passenger heated seat symbol will
no longer be shown in the display.
Low Power Voltage Cut Off
If a low voltage is detected the heated
seats will power off. The heated seats
will not function again until the voltage
rises to a safe level.
The heated seats will not power back on
automatically even if the voltage rises
to the safe level. The ignition must be
switched off then on again to activate
the heated seats.
To Next Page
Loading...
Need help?
General
