To Next Page

To Previous Page

Press button under ª and © icon to select the different options, and

press button under “]” icon to enter the option.

4.1.4.2.1 IP Address

Press the button under ¨ icon to move the cursor from left to right,

and press the button to set the value from “0” to “9”. Press the

button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.2 Subnet Mask

Press the button under ¨ icon to move the cursor from left to right,

and press the button to set the value from “0” to “9”. Press the

button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.3 Gateway

Press the

button under ¨ icon to move the cursor from left to right,

and press the button to set the value from “0” to “9”. Press the

button under “V” icon to save the setting and return the Configure menu.

4.1.4.2.4 Power Mode

Press button under ª and © icon to select the different modes, and

press button under “]” icon to set it. CAM is Continuous Awake

Mode. PSP is Power Save Protocol. PSP conserves battery power. CAM

means the printer is continuously receiving and transmitting data. This

IP Address

000.000.000.000

¨ © V

Subnet Mask

000.000.000.000

¨ © V

Gateway

000.000.000.000

¨ © V

CAM

¨PSP

TSC M23 User Manual

Other manuals for TSC M23