55
7. Maintenance
This session presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab
Lint-free cloth
Vacuum
100% ethanol
2. The cleaning process is described as following
Printer Part Method Interval
Print Head
1. Always turn off the printer before cleaning the
print head.
2.
llow the printhead to cool for a minimum of one
minute.
3. Use a cotton swab and 100% ethanol to clean
the print head surface.
Clean the print
head when
changing a
new label roll
Platen Roller
1. Turn the power off.
2. Rotate the platen roller and wipe it thoroughly
with 100% ethanol and a cotton swab, or
lint-free cloth.
Clean the
platen roller
when changing
a new label roll
Peel Roller
1. Turn the power off.
2. Rotate the Peel-off roller and wipe it thoroughly
with 100% ethanol and a cotton swab, or
lint-free cloth.
Clean the peel
roller when
changing a
new label roll
Tear
Bar/Peel Bar
Use the lint-free cloth with 100% ethanol to wipe it. As needed
Sensor
Compressed air or vacuum Monthly
Exterior
Wipe it with water-dampened cloth As needed
Interior
Brush or vacuum As needed
To Next Page
Loading...
Need help?
General
