TSC M23 User Manual

41
4.1.6.2 Backlight:
Use this option to disable or enable the LCD backlight. Printer default setting
is Disable.
Press button under ª and © icon to select the different modes, and
press button under “V” icon to set it.
4.1.7 Power Manager (Low Power, Shut Down)
Use this menu to set the amount of time before the printer goes into sleep
mode.
Power Manager
4.1.7.1 Low Power:
When the printer is inactive for a certain period of time, it goes into low power
mode to conserve battery power. (You can set the printer to go into this mode
from 10 seconds up to 5 hours.) During low power mode, the printer is not
operational. The operator must press any button or send data through RS-232
interface except the power button to wake up the printer.
Press button under ª and © icon to select the different modes, and
Disable
¨Enable
ª © V
Low Power - Shut Down - Exit
Disable - 5
Minutes
- 10
Minutes
- 20
Minutes
- 30
Minutes
- - - - - - 3 hours - Exit
Disable - 10
Seconds
- 20
Seconds
- 30
Seconds
- 1 Minute - - - - - - - 1 hour - 3
hours
- 5
hours
-Exit
Disable
¨10 Seconds
ª © V

TSC M23 Specifications

General

Brand	TSC
Model	M23
Category	Printer
Language	English