TSC TTP-343 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 94 Copyright 2013 All Rights Reserved.
 ~!F
Description
This command inquires all about files resident in the printer memory, and fonts installed in the
memory module. The filename are returned in ASCII characters. Each file name ends with 0x0D. The
ending character is 0x1A. Entering this command multiple times will cycle through the files resident on
memory.
Syntax
~!F
Parameter Description
None N/A
Example
~!F
See Also
FILES

TSC TTP-343 Plus Specifications

General

Brand	TSC
Model	TTP-343 Plus
Category	Printer
Language	English