TSC TTP-343 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 80 Copyright 2013 All Rights Reserved.
 <ESC>!D
Description
This command is used to disable immediate command, ex. <ESC>!R <RSC>!? <ESC>!C and so on, which
is starting by <ESC>!. The beginning of the command is an ESCAPE character (ASCII 27).
Syntax
<ESC>!D
Note:
This command has been supported since V6.61 EZ and later firmware.
See Also
~!D

TSC TTP-343 Plus Specifications

General

Brand	TSC
Model	TTP-343 Plus
Category	Printer
Language	English