TSC TTP-343 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 142 Copyright 2013 All Rights Reserved.
 INP( )
Description
One byte (ASCII value) is received from communication port.
Syntax
INP(n)
Parameter
Description
n
1: com1 port in printer
Note:
This command has been supported since V6.91 EZ and later firmware.
Example
Sample code
DOWNLOAD "TEST.BAS"
ascii=0
str$=""
FOR I=1 TO 5
ascii=INP(1)
str$=str$+" "+STR$(ascii)
OUT ascii
NEXT
SIZE 4,0.5
GAP 0,0
CLS
TEXT 10,10,"3",0,1,1,"The received data is: "+str$
PRINT 1
EOP
TEST
12345
Result
See Also
INP$()

TSC TTP-343 Plus Specifications

General

Brand	TSC
Model	TTP-343 Plus
Category	Printer
Language	English