TSC AUTO ID Technology Co., Ltd. 151 Copyright 2013 All Rights Reserved.
GETKEY( )
Description
This command is used to get the status of the PAUSE and FEED keys. This command waits until either
key is pressed, whereupon 0 is returned if PAUSE key is pressed and 1 is returned if FEED key is
pressed.
Syntax
GETKEY()
TTP-2410M/TTP-346M Plus/TTP-248M/TTP-246M Plus/
TTP-344M Plus/TTP-384M /TTP-644M/TTP246M/344M/
TTP-244/TTP-244 Plus/TTP-243/TTP-342/TTP-243 PLUS/
TTP-342 PLUS/TTP-342M/TTP-244ME/TTP-342M PLUS/
TTP-244ME PLUS
TDP-643 PLUS/TDP-643R PLUS/TTP-245/343/TDP-245/
TTP-245C/343C/244CE
Example
Sample code
DOWNLOAD "DEMO4.BAS"
SIZE 4,3
GAP 0,0
CLS
:START
A=GETKEY()
IF A=0 THEN GOTO PAUSEB
IF A=1 THEN GOTO FEEDB
:PAUSEB
CLS
TEXT 50,10,"4",0,1,1,"PAUSE key is pressed !"
PRINT 1
GOTO START
:FEEDB
CLS
TEXT 50,10,"4",0,1,1,"FEED key is pressed !"
PRINT 1
EOP
See Also
DOWNLOAD, EOP, END, GOTO
To Next Page
Loading...
Need help?
General
