3-2 AeroTrak
®
Handheld Airborne Particle Counter
Scree n L ay o ut a nd F u n ct io n a li t y
There are four main screens (tabs):
• Main tab
• Setup tab
• Data tab
• Reports tab
The operation of each of these screens, the information displayed on
them, and the operations you can perform from each are described in the
remainder of this chapter.
Some screens require or allow you to enter information. To enter
information, tap on the screen and an on-screen keyboard appears.
Software Input Panel (Keyboard or Keypad)
1. Throughout the setup screens, a keyboard or keypad appears on the
screen when text or numbers may be entered.
2. When you enter information using the keyboard, press either the
(Enter) or Esc keys when you are done. When you enter data
using the keypad, the data is entered when you press OK on the
screen. The keyboard will then be hidden until another text entry
box is selected.
3. When numeric input is required, a numeric keypad will appear on the
screen in place of the full keyboard.
To Next Page
Loading...
Need help?
General
