3-22 AeroTrak
®
Handheld Airborne Particle Counter
Configuration Screen
Use the Configuration screens to set configuration parameters. Press
OK when finished.
When selected, tapping the left side of Main tab on
the instrument’s screen will zoom (enlarge) both
cumulative (Σ) and differential (Δ) counts (allow the
screen a moment to update). Tap on the screen
again to return to normal view.
When selected, if the instrument stops during a
sampling period, the database will record the
partial sample data.
Controls the alarm volume setting.
Enter the particle density value that will be used to
calculate mass concentrations for display, print and
export of sample data.
To Next Page
Loading...
Need help?
General
