Operation 3-21
Change Setup Password Screen
If a Setup password is set, a password must be entered to change
instruments settings. On the main screen, selecting the Setup tab at the
bottom will display a password screen. If a Setup password has been
previously set, that password must be entered before choosing a new
Setup password.
Enabling a password for the Setup protects against a user changing
instrument settings. These settings may include creating/changing
zones, locations, and sample recipes.
You can still use the existing zones, locations, recipes, create reports,
and transfer data. You would need the password to change any of
these functions.
Tap the Setup Password icon to display the on-screen keyboard and
enter the required information.
Enter your existing password (if one has already
been set) or leave blank.
Enter a new password The password can be any
length and use any characters.
Retype the new password then press OK. A
confirmation message appears if the password
is changed.
Leave both New Password and Confirm New Password fields blank
to turn off password protection.
Contact TSI if you have forgotten the password.
To Next Page
Loading...
Need help?
General
