►
►►
► TO AVOID PERSONAL INJURY:
○ When you leave the tractor,be sure to apply the parking brake and stop the engine
○ In applying the brakes:
-The torque of wheel axle is extremely high while creep speed is being used.Be sure to step down
on the clutch pedal completely before applying the brakes,or they will not work.
-When starting to operate the tractor,be sure to release the parking brakes.Misuse of the brakes may
cause damage to the transmission and is therefore not acceptable to TYM for coverage under the
warranty.
►
►►
► The Main shift lever provides four speed ranges. The Sub shift lever provides four gear positions.
The Shuttle shift lever controls travel direction.
Use all three levers in different combinations to achieve Sixteen forward and Sixteen reverse speeds.
Machine motion must stop and the clutch pedal must be depressed before changing ranges. Gear may
be changed while machine is in motion if clutch pedal is completely depressed.
Do not operate gear levers without stopping the tractor & without using the clutch.
important
►
►►
► DIFF-LOCK PEDAL
In case of wheel slippage use the diff-lock by pushing down
on the diff lock pedal.
To release it remove the foot from the pedal.
Tractor will be difficult to turn if the Diff-lock is engaged, ensure the lock is
disengaged before turning the steering wheel.
Danger
40
important
Do not use high engine RPM when engaging Diff lock If the diff lock does not
release after removing the foot from the diff lock pedal alternatively brake with
the left and right brake until it gets released.
To Next Page
Loading...
Need help?
General
