Ubee Interactive Using the Parental Control Option
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017 76
6.7.1 Using the User Setup Option
The User Setup option allows you to configure which user accounts can or cannot
connect to your wired or wireless network, and the parameters of each connection. Field
descriptions are listed below the screen example.
Label Description
User Configuration
Add User
Remove User
Enable
Defines user accounts:
To select an existing user, choose the user from the User Settings drop-down menu.
To add a new user, enter the user name and click Add User. Note that the user name
cannot contain any spaces.
To activate the selected user, check Enable.
To remove a user, select the user from the drop-down menu and click Remove User.
Password
Defines the password for the selected user. It is required for when the user attempts to
access the Internet via the EVW32C.
Re-Enter Password Confirm the password by re-entering it.
Trusted User
Each specified user may also be enabled as a “trusted user,” which means that person will
have access to all Internet content regardless of filters that may be set up. This check box
can be used as a simple override to grant a user full access while still being able to keep
all of the previous settings stored and available.
Content Rule
Provides a drop-down list of existing content rules that define what kind of Websites the
user can or cannot visit.
To Next Page
Loading...
Need help?
General
