UFactory LITE 6 User Manual

2.5. Ethernet TCP/IP
The robot provides a gigabit Ethernet interface.
Ethernet connection steps:
• The robot and the computer are connected via Ethernet. One end of the
network cable is connected to the network interface of the robot, and
the other end is connected to the computer or LAN network interface. If
the connection is successful, the network port indicator blinks
frequently.
The default network segment IP address of the robot is 192.168.1.*(2~254).
For a specific IP address, please check the robot label. When
communicating with the robotic arm, the IP address of the computer should
be in the same network segment with the IP address of the robot.
Note:
To connect with Ethernet, please check if the computer's IP address is

UFactory LITE 6 Specifications

General

Brand	UFactory
Model	LITE 6
Category	Robotics
Language	English