UPO2000CS series User Manua
31
Press the TRIG MENU button to enter the trigger menu. Press F1 to select trigger type, use the multipurpose knob
to select to delayed trigger mode.
Delayed Trigger Menu:
Functions Options Descriptions
Type Delayed
Source 1
CH1, CH2, CH3,
CH4
Set any one of the CH1~CH4 as a trigger signal
Edge 1
Rising Trigger occurs on rising edge of source 1
Falling Trigger occurs on falling edge of source 1
Source 2
CH1, CH2, CH3,
CH4
Set any one of the CH1~CH4 as a trigger signal
Next Page Enters Delayed Trigger Menu (2)
Delayed Trigger Menu (2)
Functions Options Descriptions
Edge 2
Rising Trigger occurs on rising edge of source 2
Falling Trigger occurs on falling edge of source 2
Condition
> Triggers when time between signal 1 and 2（
T）is greater than
set time lower limit
< Triggers when time between signal 1 and 2（
T）is less than set
time lower limit
<> Triggers when time between signal 1 and 2（
T）is greater than
set time lower limit, but less than higher limit
>< Triggers when time between signal 1 and 2（
T）is less than set
time lower limit, but greater than higher limit
Setting 8.0ns~10ns
Using the multipurpose knob to set the pulse width time to be
To Next Page
Loading...
Need help?
General
