UPO2000CS series User Manual
78
⑧ Start test: press F5 to enter the second page of the test menu, then press F1 to open the operation to start the
test. See figure below:
Pass Test
The test function will run continously, and stop once 10 fail tests have been reached, or the user manually suspends
the test (when operation is set to close).
11.3 System Upgrade
This series oscilloscope can use U disk to upgrade the software to give users a more convenient and flexible
experience. To use this feature, please follow the following steps:
① Press UTILITY to enter the auxiliary function menu, press F1 to view system information, access the machine's
model number, software, and hardware version information.
② Software upgrade file can be found on Uni-T website or Uni-T distributors. Software file is consistent with the
machine model and hardware version. Software version higher than the current version is stored in the root
directory of U disk.
③ Insert U disk, press UTILITY to enter the auxiliary function menu, press F5 twice to enter the third page, press
F1 to select system upgrade. Press F1 to confirm.
To Next Page
Loading...
Need help?
General
