EasyManuals Logo
Home>UNI-T>Multimeter>UT805

UNI-T UT805 User Manual

UNI-T UT805
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
35
Model UT805: OPERATING MANUAL
Selecting a Measurement Range ( , AUTO and Button)
The Meter is default at DC Voltage 2V auto ranging
measurement mode when turning on the Meter.
Measurement ranges can be selected automatically by
the Meter in autorange or manually by the user. In the
autorange mode, the Meter selects the appropriate
range for the measurement reading.
The use of the buttons of , AUTO and :
Press or button to enter the previous range of
the auto ranging measurement mode.
To switch between measuring functions at manual
ranging mode, the Meter will enter auto ranging mode
automatically unless the measuring functions has
only manual ranging mode. When you are in
autoranging mode, the AUTO annunciator is lit.
In manual range, the Meter remains in the selected
range regardless of input. Press AUTO to toggle
back to autoranging.
At resistance measurement mode:
Auto ranging measurement mode is default.
Press AUTO to toggle in and out of the manual
l
l
l
l
ranging mode, or press or to toggle in the
manual ranging mode.
In the manual range mode, press or to up
range or down range to the desired range.
At ACV and DCV measurement mode:\
Auto ranging measurement mode is default.
Press AUTO to toggle in and out of the manual
ranging mode, or press or to toggle in the
manual ranging mode.
In the manual range mode, press or to up
range or down range to the desired range.
At 200mV range, the Meter does not have auto
ranging measurement mode.
At capacitance and frequency measurement mode:
Auto ranging measurement mode is default.
Press AUTO to toggle in and out of the manual
ranging mode, or press to toggle in the manual
ranging mode.
In the manual range mode, press to up range
or down range to the desired range.
cannot be used.
At diode, continuity, ACI and DCI measurement mode,
both and cannot be used.
l
l
l

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UNI-T UT805 and is the answer not in the manual?

UNI-T UT805 Specifications

General IconGeneral
BrandUNI-T
ModelUT805
CategoryMultimeter
LanguageEnglish

Related product manuals