34 Basic functions
Dialing with the headset connected
Prerequisite: The headset is connected.
j internal: Enter the station number.
External calls: Enter the external code and the station number.
o The headset key lights up.
The connection is established as soon as your input is complete.
Dialing with DDS keys
Prerequisite: You have saved a number on a DDS key Page 68.
S Press the key with a saved number.
If the number is saved on the second layer, press the shift key first.
^ Lift the handset.
or
n Press the key shown.
Redialing a number
The last ten external telephone numbers dialed are stored automatically.
You can redial them simply by pressing a key.
Displaying and dialing saved station numbers
, Press the key once to dial the last number dialed.
Press the key twice to dial the next to the last number dialed.
Press the key three times to dial the third-to-the-last number dialed.
or
Keep selecting and confirming the option shown until the phone number you
want appears.
Select and confirm the option shown.
Make sure your headset port is set up properly Page 29.
You can press the DDS key during a call and automatically initiate a call-
back Page 36.
If this feature is configured (contact your service personnel), account
codes entered are also saved
Page 72.
On a multi-line phone, the last number dialed on the primary line is always
saved.
To Next Page
Loading...
Need help?
General