Configuration and activation
A31003-M2000-M103-2-76A9, 07/2014
3-3 Alarm and Emergency Call Configuration, Administrator Documentation
SHB_PNG-Konfig.fm
Overview
Procedure:
1. Select the Additional Features icon in the main menu.
2. Select Operating Mode.
3. Enter the five-position service PIN and confirm with OK.
4. Select one of the three operating modes and confirm with Selection.
3.1.4 Display Rotate (OpenStage M3 Plus and OpenStage M3 Ex Plus
only)
Use this menu option to activate and deactivate the automatic position-dependent rotation of
the information on the display.
When activated, the display is rotated by 180° (upside down) in non movement and call
statuses when you move the handset from a vertical to a horizontal position.
This setting is useful if you are wearing the handset on a belt and you would like to see the
display in the event of an alarm or call without having to remove the handset from the belt. You
can then read the information on the display by simply tilting the handset outwards.
Procedure:
1. Select the Additional Features icon in the main menu.
2. Select Display Rotate.
To Next Page
Loading...
Need help?
General
