Configuration and activation
A31003-M2000-M103-2-76A9, 07/2014
3-19 Alarm and Emergency Call Configuration, Administrator Documentation
SHB_PNG-Konfig.fm
Configuration menu
7. Confirm with Save.
3.2.2.2 Resetting emergency call configuration to defaults
All values for the emergency call configuration are reset to the default values. The remaining
configuration is unchanged.
Procedure:
1. Select the Additional Features icon in the main menu.
2. Select Configuration.
3. Enter the five-position service PIN and confirm with OK.
4. Select Emergency Call.
5. Select Reset to default and confirm with YES.
3.2.3 Service PIN
The service PIN is required for accessing the Configuration and Operating Mode menus.
7
Make sure to change the default value "00000" to an individual PIN before handing
over handsets.
Procedure:
Emergency Nr. 2 (up to 32 digits) (blank)
Emergency Nr. 3 (up to 32 digits) (blank)
Calling Time 0 ... 60 s 30 s
Audio Channel Handset / Handsfree Handset mode
Emergency Key SP On/off On
Emergency Key LP On/off On
Emerg. Key Locked On/off Off
Emergency Signal SP On/off On
Emergency Signal LP On/off Off
Melodies Alarm 1 ... 5 Alarm 1
Volume 1 ... 5 3
Parameters Value Range Standard Value
Table 3-15 Parameter – Emergency Call
To Next Page
Loading...
Need help?
General
