Name: Unitech MS832
Brand: Unitech
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Hands Free Time-Out

The Scan Stand and Presentation Modes are referred to as “hands free” modes. If the

scanner’s button is pressed when using a hands free mode, the scanner changes to manual

trigger mode. You can set the time the scanner should remain in manual trigger mode by

setting the Hands Free Time-Out.

Once the time-out value is reached, (if there have been no further button presses) the scanner

reverts to the original hands free mode.

Scan the Hands Free Time-Out bar code, then scan the time-out duration (from 0-300,000

milliseconds) from the inside back cover, and Save. Default = 5,000 ms.

Reread Delay

This sets the time period before the scanner can read the same bar code a second time.

Setting a reread delay protects against accidental rereads of the same bar code. Longer delays

are effective in minimizing accidental rereads.

Use shorter delays in applications where repetitive bar code scanning is required. Reread

Delay only works when in Presentation Mode (see page 25). Default = Medium.

Unitech MS832 User Manual

Other manuals for Unitech MS832