Unitech MS832 User Manual

71
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Coupon GS1 DataBar Output
If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and
output only the data from the GS1 DataBar code. Scan the GS1 Output On code below to
scan and output only the GS1 DataBar code data. Default = GS1 Output Off.
UPC-E0
<Default All UPC-E Settings>
UPC-E0 On/Off
Most U.P.C. bar codes lead with the 0 number system. To read these codes, use the UPC-E0
On selection. If you need to read codes that lead with the 1 number system, use UPC-E1
(page 74). Default = On.

Unitech MS832 Specifications

General

Brand	Unitech
Model	MS832
Category	Barcode Reader
Language	English