Universal Remote Control URC-A6 User Manual

Page | 14
Step5: You can continue learning all other
buttons from your old remote by pressing the
next button on the URC-A6 and repeating
this step.
Note:
The component light will blink five
times if there was an error in the learning
process. In this case, please repeat Steps 3
and 4.
STEP6:
Save your work.
Once the URC-A6
has learned all the buttons for the selected
component, press and hold the Component
button and ENTER buttons at the same time
to save the learned functions. The component
light will blink three times to confirm the set-
up.
Check your work.
Test all the buttons to
make sure they learned correctly. Repeat
Steps 1-5 to program any other component
modes.
We love to e-mail!
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER.
E-MAIL: techsupport@UniversalRemote.com
Phone: 1-800-901-0800 (9:00AM - 6:00PM
EST Monday - Friday)
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
Replace
with
high
quality
image

Universal Remote Control URC-A6 Specifications

General

Brand	Universal Remote Control
Model	URC-A6
Category	Remote Control
Language	English