Universal Remote Control URC-A6 User Manual

Page | 30
ErasingMacroPower&Other
MacroCommands
STEP1: To erase MacroPower commands on
the POWER ON or SYSTEM OFF buttons,
press and hold either the POWER ON or
SYSTEM OFF button and the MUTE button
simultaneously for two seconds until the
current status Component light turns on.
STEP2:Press the
CHANNEL UP [CH▲] button to erase and
exit Erase mode. The component light will
blink three times to confirm the erasure.
NOTE:
To erase other Macros, simply press
the appropriate button in Step 1 in
combination with the MUTE button.
Note: If you do not press a button within 30
seconds, the component light will turn off.
The remote will exit the programming mode,
and you will have to start over with step
one.
Replace
with
high
quality
image

Universal Remote Control URC-A6 Specifications

General

Brand	Universal Remote Control
Model	URC-A6
Category	Remote Control
Language	English