Universal Remote Control URC-A6 User Manual

Page | 15
If the Learning Method does not work, here
are a few suggestions:
● Infrared (IR) beams on all remotes are
sensitive to light, and can be impacted
several ways. Here are some things to
look out for:
- If you have a Plasma TV, move
farther away from it or to another
room while working with the
remotes.
- Avoid programming under
fluorescent light or direct sunlight.
Close your curtains during the day.
- If you have a glass top or metal
table, put a cloth between the table
and the remotes to reduce
reflections. It’s a great use for your
black t-shirts.
● Put new batteries in the old remote.
● Gradually vary the distance between the
two remote controls.
● Adjust the angles of the remotes (i.e.,
keep the URC-A6 on a flat surface while
holding the other remote in hand and
angling it down toward the URC-A6)
● Tap and release the button on your old
remote instead of pressing and holding
the button down
Here are some additional facts regarding
the learning process:
● Learned functions override any existing
preprogrammed functions on the remote
control
● Learned functions are automatically
erased when a new function is learned
on the same button
● Learned functions are retained even after
a different set-up code number is
programmed into the remote control
● To return to an original pre-programmed
function, a learned function must be
erased. See page 27.

Universal Remote Control URC-A6 Specifications

General

Brand	Universal Remote Control
Model	URC-A6
Category	Remote Control
Language	English