5-39
Operation on the Machine > Sending
Scanning with FMU Connection
"FMU Connection" is installed on the machine as a standard application.
FMU Connection can be used to scan an original according to the settings configured with "File Management Utility" on
the provided DVD, and save the image data and scanning information on a specified server or in a specified folder.
Unlike regular transmission functions, this application lets you use metadata such as the scan date and time and the
data format.
Using FMU Connection to scan an original
1
Make sure that File Management Utility is running on the
computer (or server) on which File Management Utility is
installed.
2
Place the original.
3
Press [FMU Connection].
FMU Connection starts.
4
Follow the on-screen instructions to enter the necessary
information and press [Next].
5
When the scan settings screen appears, press each item and
configure the necessary settings.
The features that can be set depend on File Management Utility.
6
Press the [Start] key.
Sending starts.
• The first time you use FMU Connection, you must enable it in System Menu. For details, refer to Application on page
8-23.
• To use FMU Connection, you must install File Management Utility on your computer and configure settings for the
multifunction machine to be used, scanning conditions, and the file save location. To install File Management Utility,
refer to Installing Software
on page 2-20.
• For information on using File Management Utility, see File Management Utility User Guide on the DVD.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
