6-2
Using Various Functions > Functions Available on the Machine
Functions Available on the Machine
Copy
To configure the settings for functions, press the function key. By pressing [Functions], other selectable functions will be
shown as a list.
For details on each function, see the table below.
Function key Description
Reference
page
Paper Selection Select the cassette or multi-purpose tray that contains the required paper size. page 6-9
Zoom Adjusts the zoom to reduce or enlarge the image. page 6-14
Density Adjust density using 9 levels. page 6-11
Duplex Produces two-sided copies. page 6-18
Combine Combines 2 or 4 original sheets into 1 printed page. page 6-16
Quiet Mode Lower print and scan speed for quiet processing. page 6-21
Functions Description
Reference
page
Collate Offsets the output by page or set. page 6-10
Original Size Specify the original size to be scanned. page 6-8
Original Orientation Select the orientation of the original document top edge to scan correct direction. page 6-10
Original Image Select original image type for best results. page 6-11
EcoPrint EcoPrint saves toner when printing. page 6-12
Sharpness Adjusts the sharpness of image outlines. page 6-13
Background Density
Adj.
Removes dark background from originals, such as newspapers. page 6-13
Prevent Bleed-thru Hides background colors and image bleed-through when scanning thin original. page 6-14
Continuous Scan Scans a large number of originals in separate batches and then produce as one job. page 6-19
Job Finish Notice Sends E-mail notice when a job is complete. page 6-20
File Name Entry Adds a file name. page 6-21
Priority Override Suspends the current job and gives a new job top priority. page 6-21