5-43
Operation on the Machine > Using a Custom Box
Using a Custom Box
Custom Box is a component box which you can create within the Document Box and store data for later retrieval. You
can create or delete a Custom Box, and manipulate data in various ways as described below:
Creating a New Custom Box
1
Display the screen.
1 Press [Custom Box] on the Home screen.
2 Press [Menu], [ ], and then [Add].
2
Create the Custom Box.
1 Enter the box name.
Up to 32 characters can be entered.
Creating a New Custom Box (page 5-43)
Storing Documents (page 5-46)
Printing Documents (page 5-47)
Editing Documents (page 5-48)
Deleting Documents (page 5-49)
The operation on Custom Box you perform from operation panel can also be made using Embedded Web Server RX.
For details on Embedded Web Server RX, refer to Embedded Web Server RX User Guide.
• To use Custom Box, an optional SSD must be installed in the machine.
• If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
The factory default login user name and login password are set as shown below.
• If user login administration is enabled, log in with administrator privileges to perform the following operations. They
cannot be performed with user privileges.
- Creating a box
- Deleting a box of which owner is another user.
Character Entry Method (page 11-12)
Model Name Login User Name Login Password
P-4030i MFP/P-4035i MFP 4000 4000
P-5035i MFP 5000 5000
P-6035i MFP 6000 6000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
