2-30
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
1
Display the screen.
1 Click [Start] button on the Windows and enter [Scanner] in [Program and File Search].
Click [View scanners and cameras] in the search list then the Scanners and Cameras
screen appears.
2 Select the same name as this machine from WIA Drivers, and press [Properties].
2
Configure WIA Driver.
In Windows 8, click [Search] in charms, and enter "View scanners and cameras" in the
search box. Select [View scanners and cameras] in the search list then the Scanners
and Cameras screen appears.
Enter the machine IP addresses or host name.
1
2
5
When using SSL, select the checkbox beside SSL.
3
4
Set units of measurement.
(Network)
(USB)
1
2
3
Set units of measurement.
Set the Compression Level.
4