Velux GGL INTEGRA User Manual

28 29
1
Menu
No. 1
Window
House
Locate
P1
P2
Start
--- PROGRAM P1 ---
Back
Program 1
Program 2
Program 3
Program 4
P1
P2
2
1
2
Menu
No. 1
Window
House
Locate
P1
P2
Stop
--- PROGRAM P1 ---
Back
Program 1
Program 2
Program 3
Program 4
P1
P2
▸
Activating and interrupting a Program P1/P2
Activating a program
You can activate eight programs at a time. You
can still use the various functions of the remote
control at the same time as one or more programs
are activated by pressing a program key.
Below four programs have been recorded under
program key P1.
The example shows how to activate Program 3
under program key P1.
Press
P1
"P1" three times to activate Program 3.
Program 3 is marked in the display and the pro-
gram automatically starts.
Note: Maximum time interval between each key
pressure: 2 seconds. Otherwise the program that
happens to be highlighted will automatically be
activated.
Interrupting a program
Icon
▸
indicates that a program has been acti-
vated. A program in progress can be interrupted
as follows:
Press
P1
or
P2
to find the program in progress.
The activated program has been ticked.
Press
to highlight the program in question.
Press
"Stop" to interrupt the program.

Velux GGL INTEGRA Specifications

General

Brand	Velux
Model	GGL INTEGRA
Category	Remote Control
Language	English

Summary

Important information

Safety

Precautions for safe operation and handling of electrical products.

Initial set-up

IMPORTANT!

Crucial notes regarding product registration and setup time limits.

Initial set-up steps

Step-by-step guide for initial setup and product registration.

Function guide

Locating and operating a product

One window

Guide to locating and operating a single window.

More than one window

Guide to locating and operating multiple windows.

Choosing positions and luminous intensity

Creating a Room

Steps for creating a Room

Editing a Room

Moving products between Rooms

Creating a Group

Steps for creating a Group

Recording a Program P1/P2

Steps for recording a program

Instructions on how to record operating sequences into program keys.

Activating and interrupting a Program P1/P2

Activating a program

How to activate a recorded program using program keys.

Interrupting a program

How to stop or interrupt an active program.

Timer

Setting a timer for operation

How to set a timer for automatic window operation.

Access code

Setting and using an access code

Guide to setting up and using a personal access code for security.

Keypad lock

Enabling and disabling keypad lock

Rearranging order

Clearing remote control settings

Resetting all settings

Registering a new product

Steps for registering products

Guide to registering new VELUX or io-homecontrol products.

Copying to a remote control not yet in operation

Copying settings to a new remote

Copying to a remote control in operation

Copying settings to an active remote

Registering products from other types of control units

Transferring products from other units

Copying products to other types of control units

Transferring products to other units

Security key

Changing and transferring security keys

How to change and transfer security keys between remotes.

Resetting the system

Resetting the window and remote control

Steps to reset both the window operator and the remote control.

Manual operation of the window

Closing window in case of power failure

Maintenance of the window