12 13
Menu
No. 2
Roller shutter
House
Locate
P1
P2
50% down
1
2
3
Run to position
Enter Back
Menu
No. 1
Window
House
Locate
No. 1
No. 2
No. 3
Enter
------------- HOUSE -------------
Back
P1
P2
P1
P2
1
2
3
4
Window
Roller shutter
Blind
Lights
------------- BLIND -------------
231
A product or a Group of products can be set
to travel to a certain position. The example shows
how to set a roller shutter to run 50% down.
Locate the product in question, see section
Locating and operating a product.
Product chosen is displayed.
The example shows roller shutter No. 2.
Press and hold key
and watch the display.
Each black spot corresponds to the roller shutter
running 10% down. Five black spots thus corres-
pond to it running 50% down.
Release key
and the roller shutter will travel to
the position chosen.
Note: A short key pressure will make the roller
shutter travel to maximum top or bottom position.
Lights or a Group of lights can be operated on
the same principle. The percentages correspond
to luminous intensity. Short key pressure: The lights
are switched on or off completely.
A Venetian blind can be operated in two ways.
It can be drawn up and down, as described for
the roller shutter, and its slats can be tilted. To tilt
the slats of the Venetian blind, choose Tilt with
the navigation keys
when the product has been
located.
To obtain ventilation via the ventilation flap with-
out opening the window, release key
when
“Ventilation” is displayed.
Choosing positions and luminous intensity
More than one window
With more electrical products
Three windows are each equipped with a window
operator, a roller shutter, a blind and frame lights.
The example shows how to locate and operate
blind No. 3.
Press
"Locate".
Displays the list of product types in House.
Press to highlight "Blind".
Press
"Enter".
Press
to highlight blind "No. 3".
Press
"Enter".
Press
to start operation.
Locating and operating a product
To Next Page
Loading...
Need help?
General
