EasyManuals Logo
Home>VERITAS>Storage>NetBackup 5230

VERITAS NetBackup 5230 User Manual

VERITAS NetBackup 5230
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Tag VLAN data entry fields
Select Interface
Select the network interface or the device name to which you want to tag the VLAN.
Description
Enter a description for the VLAN. For example, Finance or Human Resource.
VLAN Id
Enter a numeric identifier for the VLAN. VLAN IDs can range between 1- 4094. For
example, 1 or 10.
IP Address [IPv4 or IPv6]
Enter the IPv4 or the IPv6 address to be used for this appliance.
Subnet Mask
Enter the subnet mask value that corresponds to the IP address.
Click Add to add the configuration information for tagging VLAN into to your existing
network environment.
To enter information for tagging additional VLANs, click the + sign to add a row. To
remove any of the rows, click the - sign that is adjacent to the Subnet Mask field.
Enter the appropriate Add Static Route information as follows:
Add Static Route data entry fields
Destination IP
Enter the network IP address of a destination network. The address can be either
IPv4 or IPv6. Only global-scope and unique-local IPv6 addresses are allowed.
See “About IPv4-IPv6-based network support” on page 12.
Destination Subnet Mask
Enter the subnet value that corresponds to the Destination IP address.
For the initial configuration, this field contains a default value that cannot be changed.
When you configure another route, you must enter the appropriate value.
Gateway
Enter the address of the network point that acts as an entrance to another network.
The address can be either IPv4 or IPv6. Only global-scope and unique-local IPv6
addresses are allowed.
See “About IPv4-IPv6-based network support” on page 12.
Network Interface
Click on the drop-down box and select the ethernet NIC port to use for a network
connection.
After you have entered the appropriate data into all fields, click + to save and add
the routing configuration settings.
7
On the Host Configuration page, enter the appliance host name and the
related host resolution information as follows:
37Initial configuration procedures
Performing the initial configuration on a NetBackup 52xx appliance from the NetBackup Appliance Web Console

Table of Contents

Other manuals for VERITAS NetBackup 5230

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VERITAS NetBackup 5230 and is the answer not in the manual?

VERITAS NetBackup 5230 Specifications

General IconGeneral
Language version-
License typeCorporate
License quantity- license(s)
License term in years1 year(s)

Related product manuals