49
UsE CALLING NUMBER DIsPLAY TO
AUTOMATICALLY sET DATE AND TIME
If you subscribe to a Network Calling Number Display
service, the date and time are set automatically with
each incoming call. Follow the steps below to turn the
CID time sync feature on or off. The default setting is On.
Press
when idle.
Press
or to scroll to Settings, then press .
Press
or to scroll to CID time sync, then press
.
Press
or to scroll to On or Off, then press .
qUIET MODE
You can turn on the quiet mode for a period of time (1-12
hours). During this period, all tones (except paging tone)
and call screening are muted.
When you turn on the quiet mode, the answering
machine turns on automatically. When the quiet mode
duration expires, the answering machine remains on.
To set and turn the quiet mode on:
Press and hold
on the handset. The handset
shows Quiet: _ _ hours (1-12 hours).
Enter the desired duration (1-12), then press
.
To turn the quiet mode off:
While the quiet mode is on, press and hold
To Next Page
Loading...
Need help?
General
