wc_tx001803gb.fm
138
Maintenance E 3000
8.4 Inspecting the Electrical Components
Requirements
Machine shut down and cooled
Circuit breaker off
Power disconnected
.
Inspections
Inspect the electrical connections and cables on the following items for corrosion,
wear, or damage. Repair or replace as necessary.
This procedure continues on the next page.
WARNING
Electric shock hazard. High voltage exists at various locations in the machine. High
voltage can cause severe injury or death.
f Disconnect the power supplies before inspecting the electrical systems.
Item Reference Photo
Control panel
f Open the con-
trol panel
Pump/motor
(a)
Burner (b)
Battery (c)
To Next Page
Loading...
Need help?
General
