ghi_tx001160gb.fm
38
Lifting and Transporting E 3000
3.7 Hazardous Materials Placards
Hazardous
materials
placards
The Pipeline and Hazardous Materials Safety Administration (PHMSA) requires
that hazardous materials placards be placed on this machine when transporting it
unless the fuel tank has been drained and purged of all fuel and residue.
Before transporting the machine:
1. Drain and purge the fuel tank of all fuel and fuel residue OR place placards that
display the numeric hazardous material code for diesel fuel on three sides of the
machine.
Note: The placards are included with the machine.
2. Consult the Department of Transportation (DOT), or equivalent agency, in the
states or countries in which this machine is to be transported, regarding:
Driver’s licensing requirements for transporting machines that bear hazard-
ous materials placards
Other restrictions for use of this machine
To Next Page
Loading...
Need help?
General
