Wacker Neuson E3000 User Manual

ghi_tx001162gb.fm
79
E 3000 Accessories
5.2 Expanding the Surface Heating Capacity
Background The E 3000 can be combined with Wacker Neuson Hose Handling Systems (HHS
3002) and Dual Pump Packs (DPP) to increase the surface heating capacity. The
typical configurations are shown below; however, this does not represent all
possible configurations. For more information, contact Wacker Neuson Application
Support.
Estimated
capacities
The machine is capable of the following when utilizing the expansion configurations
illustrated below.
Option 1 E 3000 combined with one HHS 3002 (a) and one DPP (b).
Option 2 E 3000 combined with two HHS 3002’s (a) and two DPP’s (b).
Note: This configuration requires installing an Auxilliary Pump Panel for power
protection. See topic “Mounting the Auxiliary Pump Panel.”
For more information regarding setup of these configurations, continue reading.
Option
Description
Application
Thaw Cure Frost Prevention
1
1 HHS and 1 DPP
m
2
(ft
2
)
550
(6000)
1110
(12,000)
1670
(18,000)
2
2 HHS and 2 DPP
m
2
(ft
2
) Not applicable
1670
(18,000)
2500
(27,000)
wc_gr008539
wc_gr008540

Wacker Neuson E3000 Specifications

General

Electrical Requirements	230 V, 50 Hz
Voltage	230 V
Operating Voltage	230 V
Heat Capacity	3000 W
Fuel Consumption	0.3 l/h
Tank Capacity	12 l
Fuel Tank Capacity	12 l
Heating Capacity	3000 W
Fuel Consumption (l/h)	0.3 l/h
Tank Capacity (l)	12 l
Power Consumption	3 kW