Why does my Wacker Neuson Construction Equipment engine stop by itself?
If your Wacker Neuson Construction Equipment engine stops by itself, it could be due to the following reasons: * The fuel tank is empty. * The fuel filter is plugged. * The fuel lines are broken or loose.
Why is there no steering in my Wacker Neuson RD 16?
If your Wacker Neuson Construction Equipment has no steering, it could be due to: * A damaged steering cylinder. * A damaged steering unit. * A steering relief valve that is stuck or damaged. * The articulation joint lockarm being engaged.
General| Brand | Wacker Neuson |
|---|---|
| Model | RD 16 |
| Category | Construction Equipment |
| Language | English |
Lists essential documents like Operator's Manual, Parts Book, and Repair Manual.
Explains the manual's purpose to provide safe operation and maintenance info.
Alerts about chemicals in exhaust and components known to cause cancer/birth defects.
Advises on using spark arresters for engines based on local laws.
Defines approved parts, attachments, and modifications for the machine.
Explains DANGER, WARNING, CAUTION, and NOTICE signal words and symbols.
Describes the ride-on roller and lists examples of misuse to avoid.
Provides essential safety guidelines for operating the machine.
Covers hazards and precautions related to engine operation and fueling.
Outlines safety measures and training required for servicing the machine.
Illustrates the placement of various labels on the machine.
Details the meaning and importance of different safety warning labels.
Explains informational labels related to tie-down, fill points, and brakes.
Shows a diagram identifying operational and service locations on the machine.
Details the function of various switches, indicators, and controls on the panel.
Instructions on how to position, check, and maintain the ROPS for safety.
Procedures for setting up and lowering the foldable ROPS for operation or transport.
Explains the installation and function of the rotating beacon and backup alarm.
Describes the function of parking, work, and road lights.
Instructions on how to use, adjust, and replace the seat belt.
Explains the system that prevents operation if the operator is not seated.
Describes the function and adjustment of scraper bars for drum cleaning.
Details how to secure parts of the machine against theft or vandalism.
Explains the function and use of the lockarm for securing the machine halves.
Discusses factors affecting machine stability like surface conditions and steering.
Provides guidelines for safe operation on slopes and hills.
Specifies the type of fuel required for the machine's engine.
Details the correct seating position and operator posture for safe operation.
Steps for preparing the machine before its initial operation.
Lists essential checks to perform before starting the machine.
Step-by-step instructions for safely starting the machine's engine.
Detailed steps for safely stopping and parking the machine.
Explains the function and application of the mechanical parking brake.
How to control the direction and speed using the forward/reverse lever and throttle.
Describes the hydrostatic transmission and forward/reverse controls.
How to turn the vibration ON/OFF and select drum modes.
Instructions for operating the water spray system and winter draining.
Steps to follow in case of breakdown or accident requiring shutdown.
Procedures for disconnecting the battery and information on the auxiliary terminal.
Explains the function of various indicator lights on the control panel.
How to operate turn signals and hazard lights if equipped.
Details daily, 100-hr, 300-hr, and 500-hr engine maintenance tasks.
Lists daily, 100-hr, 600-hr, and 1200-hr machine maintenance tasks.
Provides diagrams and part lists for ROPS and seat belt components.
Guidelines for cleaning, checking, and maintaining the seat and seat belt.
Procedure for cleaning clogged spray bars to ensure water flow.
Instructions on how to open the operator's platform for access.
Steps for changing the fuel filter and priming the fuel system.
Procedures for disconnecting, connecting, and servicing the battery.
Steps for changing the engine oil and oil filter.
Instructions for replacing air filter elements.
Identifies lubrication points on the articulation joint, drums, and steering cylinder.
Importance of keeping hydraulic oil clean and methods to prevent contamination.
Recommendations for selecting and using hydraulic oil.
How to check hydraulic oil level and information on the suction strainer.
Procedure for draining and refilling hydraulic oil and replacing the filter.
Steps to remove air from the hydraulic system after oil change.
Instructions and safety precautions for lifting the machine.
Guidelines for securing the machine for transport on a trailer.
Steps for storing the machine for more than 30 days.
Detailed instructions and warnings for towing a disabled machine.
Step-by-step guide to manually release the parking brake.
Lists common problems, their causes, and recommended remedies.
Diagram showing the hydraulic system components and their connections.
List of components identified in the hydraulic schematic.
Diagram showing the electrical system for the RD 16 model.
List of components identified in the RD 16 electrical schematic.
Diagram showing the electrical system for the RD 16 IRH model.
List of components identified in the RD 16 IRH electrical schematic.
Provides specifications for the machine's engine, including type, make, and capacity.
Lists physical dimensions, weight, speed, and gradeability of the roller.
Details the types of lubricants required for engine, hydraulic system, and bearings.
Provides dimensional drawings and measurements of the machine.
Reports sound power levels and operator exposure to hand/arm and whole body vibration.
Lists operating and relief pressures for the drive, steering, and vibration systems.
Defines the machine category as a dual drum ride-on roller and its intended function.
Presents measured and guaranteed sound power levels as per Directive 2000/14/EC.
To Next Page