RD 16 Maintenance
wc_tx001076gb.fm 83
4.21 Storage
If machine is to be stored for more than 30 days:
• Drain the fuel tank and drain the water tank. If ballast was added
to the rear drum, also drain the rear drum.
• Change the engine oil.
• Clean the entire roller and engine compartment.
• Remove dirt from the cooling fins on the engine cylinders and on
the blower housing.
• Set the lockarm to secure the roller halves together.
• Remove the battery from the machine and charge it periodically.
• Cover the entire machine and place it in a dry, protected area.
To Next Page
Loading...
Need help?
General
