Wacker Neuson RD 16 User Manual

Maintenance RD 16
74 wc_tx001076gb.fm
4.10 Engine Oil and Filter
See Graphic: wc_gr003780
Change the oil and the oil filter (b) every 250 hours. On new machines,
change the oil after first 50 hours of operation. Drain the oil while
engine is still warm.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid which drains
off. Dispose of this liquid in accordance with environmental protection
legislation.
To change oil:
4.10.1 Remove the oil filler cap (a) and oil drain plug (c). Drain the oil into a
suitable container.
4.10.2 Reinstall the drain plug and tighten.
4.10.3 Remove and replace the oil filter (b).
4.10.4 Remove the oil filler cap (a) and fill the engine crankcase with
recommended oil. See section Technical Data for oil quantity and type.
4.10.5 Install the oil filler cap.

Wacker Neuson RD 16 Specifications

General

Brand	Wacker Neuson
Model	RD 16
Category	Construction Equipment
Language	English