RD 16 Operation
wc_tx001075gb.fm 43
• Reduce travel speed and watch the drum position carefully when
operating along the edge of an elevated surface.
• Keep as much of the drum on the elevated surface as possible.
Vibrating on a compacted surface
Activating the vibratory system on a fully compacted surface may
cause the drums to rebound and momentarily lose contact with the
ground. If this occurs while the machine is on an incline, the machine
may slide.
• If the drums rebound on the compacted surface, reduce vibration
speed or stop vibration entirely.
To Next Page
Loading...
Need help?
General
