WAGNER SPRINT XE User Manual

47
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2354920
SPRINT XE
7.5.2.2 CLEANING PROCESS WHEN USING MULTIPLE POWDER TANKS
Note:
For a paint change, all components of the powder feed system must be thoroughly cleaned.
P_01785
EPG
SPRINT X
0
%
10
20
30
40
50
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
80
100
%
Tri
90
60
70
17
Procedure:
1. Release the trigger on the spray gun.
The high voltage and the powder feed are
deactivated.
2. Remove the injector from the holder to stop
powder feed.
3. Hold the gun in the spray booth and start the
 ush function by pressing the "Flush" button (17).
The injector and hoses are  ushed.
4. Switch o control unit.
5. Loosen the powder feed hose from the powder
injector and clean the spray gun and the powder
feed hose thoroughly.
6. Loosen the blue dosing air hose and the red
feed air hose from the powder injector.
7. Disconnect the black  uid air hose from the
powder tank.
8. Loosen the grounding cable from the powder
tank.
9. Replace the powder tank.
10. Reconnect all the hoses and ground the powder
tank by connecting to the grounding cable.
Note:
Proper  uidization is not possible with a damaged
and/or clogged  uid base.

WAGNER SPRINT XE Specifications

General

Brand	WAGNER
Model	SPRINT XE
Category	Paint Sprayer
Language	English