CardioPerfect
Pocket ECG User - Manual
DIR 80012822 Ver. C 12 / 41
2. Recording ECGs
2.1 Record an ECG
Pocket ECG records ECGs fast, easily and reliably. The only thing you have to do is make sure
the electrodes are placed correctly and switch on the recorder. Pocket ECG takes care of
recording and saving the recording.
To record an ECG, you need to follow these global steps. Each step is explained in more
detail on the following pages.
1. Place electrodes on the patient (see § 2.2 ).
2.
In Pocket ECG, create a Ne
w E
CG test.
If there are no recordings for this patient on your Pocket PC start with To create a new test.
If a previous test is available for the patient for whom you want to record an ECG or if a Patient
card is available for this patient, select the (latest) test or the patient card, indicated with
, in
the File list area then continue with To create a new test.
To create a new test:
In the Command ba
r, tap on the ECG menu and tap New.
If you have selected a patient/file in the File list area, Pocket ECG will ask if you want
to copy the Patient data from the selected file to the new ECG.
If you select Yes the Patient data will be copied into the Patient card for the new test. If
you select No or if no file was selected the Patient card will be empty and has to be
filled in later.
To Next Page
Loading...
Need help?
General
