Welch Allyn CARDIOPERFECT User Manual

CardioPerfect
Pocket ECG User - Manual
DIR 80012822 Ver. C 34 / 41
There are multiple configurations and solutions possible for establishing an Internet
connection with your Pocket PC. It is not our intention to provide a complete reference for
this so we will limit to a connection using a mobile phone with a dial-up connection.
What do you need?
You will need a mobile phone with a connection to the Pocket PC (this might be a cable to
the expansion slot, it might be an infrared connection or a bluetooth connection).
The mobile phone must call an Internet provider, so you will have to get an account with a
local provider. This provider will give you all the information you need to fill in the different
fields mentioned below.
Setting up a dial up connection
You can create/edit a connection by going to the main menu  select settings  select
Tab Connections  select Icon Connections
Here you have to find the Internet settings dropdown box and select Internet settings
Select this item and press Modify
Now you can either create a new connection or edit one. For this you have to use the
settings provided by the Internet provider.
You can test for a proper connection setup by using Internet explorer on your Pocket PC.
If you have trouble connecting to the Internet check the following things:
 Are your dialing patterns ok, you can check this by going to main menu  select
settings  select Tab Connections  select Tab dialing locations  select Dialing
patterns
 Is your mobile phone enabled for communication with your Pocket PC? (some phones
must be enabled for infrared communications)
 Is your Pocket PC communication modem activated? (Infrared port or Bluetooth port).
Check your Pocket PC user’s manual on how to activate this.
3. Setup the Pocket ECG application settings
Activating your Pocket ECG application can be done by going to the main menu  select
Programs  select the icon Pocket ECG.
Before you can do anything you should register the program. For this you should have
received a serial number and a registration code. You can fill this information in the proper
fields by going to the Pocket ECG application system menu  select about  select
Registration.
Enter E-mail address, Serial number and Key. Please note that the E-mail address
registered at Welch Allyn forms a unique combination with the serial number to provide the
key. Therefore only use this combination to fill in the three registration fields.
After registration we recommend that you enter the contact list, the user list and the
recording hardware in advance, see next paragraph.
8.4 Customizing Pocket ECG
You can customize Pocket ECG and your Pocket PC to your own preferences. The features
that you can customize for Pocket ECG are located in the Options Menu in File list mode and
in the ECG menu under option Display in Monitor mode and Review mode.
The last features are discussed in paragraph 0:
Viewing E
C
Gs. These settings have only effect on how the ECG traces
are displayed, they

Welch Allyn CARDIOPERFECT Specifications

General

Software	CardioPerfect Workstation
Connectivity	USB, Ethernet, Wireless
Recording Channels	12-lead
Power Supply	Rechargeable Battery
Data Storage	Internal Memory
Dimensions	Varies depending on configuration
Weight	Varies depending on configuration
Compatibility	EMR systems