Xerox 3225 User Manual

QMS 3825/3225/2025 User's G uide4-16
Print Quality P r obl e ms
Not All Pages Print
If a job partially prints, check the following:
1 Check your printer interface cable. You could have the
wrong kind of cable, or the printer may not be configured for
the correct cable and port.
In your system administrator’s guide, see chapter 2, “The Com-
munications Submenu,” for interface information and appendix B,
“Cable Pinouts,” for cable information.
2 Make sure no one pressed the Cancel Job key while your job
was printing.
3 Check the message window to see if the printer is reporting
PUT
SIZE PAPER IN NUMBER INPUTBIN.
Paper Jam Indicator Stays On
If the Paper Jam indicator lights, open the appropriate area of the
printer and clear the jam. See the previous sections on clearing paper
jams for more information. If the indicator stays on after clearing the
jam, check the following:
1 Open and close the printer’s front cover to clear the jam signal.
2 Look again in the transport areas for paper, especially if any
sheets tore when you were clearing the jam.
3 Place a service call.
Print Quality Problems
Print quality problems are those related to the appearance of the
pages you have printed. These include white lines, uneven blacks,
and other print distortions.

Xerox 3225 Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet, Wi-Fi
Monthly Duty Cycle	Up to 30, 000 pages
Input Paper Capacity	250 sheets
Output Paper Capacity	120 sheets
Functions	Print, Copy, Scan, Fax
First Page Out Time, Printing	As fast as 8.5 seconds
Processor	600 MHz
Print Memory (standard)	128 MB
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Media Sizes	A4, A5, Letter, Legal, Executive, Envelope